|
ADA COMPLIANT
|
Florestone
Model 40-62H TB
Barrier-Free Shower
O.D. = 62" x 39" x 77"
I.D. = 60" x 37" x 76"
Weight: 310 lbs.
Architect's
Specifications
|
ADA
COMPLIANT*
CALIFORNIA ADA
COMPLIANT*
|
|
Note: Units sold in CA
DO NOT come with a slide bar. Instead a stationary
wall hook will be installed per CA-ADA
requirements (2022).
|
Furnish and install one-piece Model 40-62H TB designed for
barrier-free use as manufactured by Florestone. Unit to be
manufactured of AcrylX™, and to be supplied with
slip-resistant floor laminated for extra rigidity. Basic
shower will conform to ANSI-Z-124.2. Unit to include
stainless steel curtain rod; Symmons® pressure balance
mixing valve with concealed check stops; Moen® hand-held
shower head with hose and stainless steel slide bar/grab
bar; stainless steel corner grab bar; stainless steel
recessed soap dish; white naugahyde folding wheelchair
transfer seat (specify right or left hand).
Supplied with 2" brass drain.
Shower curtain optional.
Curtain Size: 72" x 72".
Standard Color: White.
Special order colors available.
Local ANSI compliance and code may vary from the ADA code
compliance on existing Florestone Units. If you would like
a different placement of grab bars, or valves other than
stated on the Spec Sheets of each unit, please make a note
on your PO on the specific dimension placement you would
like the accessories attached. Please contact Florestone
Inside Sales for clarification or assistance.
Dimensions may vary ± ¼ inch. Please
check unit before installation.
|
For barrier-free installation, contractor shall
provide ⅝" minimum recess for curb in sub
floor.
*ADA compliance when accessories installed by
manufacturer.
Note: Exterior floor drain for water run-off
recommended.
Symmons® is a Registered Trade Mark of Symmons
Industries, Inc.
Moen® is a Registered Trade Mark of Moen
Corporation.
|
|
Standards:
|
I.A.P.M.O. Listed File 0687
|
|
ANSI-Z-124.2 |
|
|
Dimensions subject to
change without notice
|
Contact Florestone Products to
verify product specifications.
|
|
|
|
CAD Drawings are compressed in zip format (.zip)
|