|
Florestone Terrazzo
Model 23-2HR Barrier-Free
Shower Bases
Architect’s
Specifications
Furnish and install wheelchair accessible terrazzo shower
base Model 23-2HR as manufactured by Florestone. Flanges
on three sides, cast integral, shall be of
galvanized-bonderized steel and shall extend not less than
1" above the shoulders. Shoulders on three sides
shall be not less than 2½" inside. Threshold
shall be not more than ½" above base floor to
allow for barrier free entrance. Drain body shall be
brass, cast integral, and shall provide for a non-caulked
connection not less than one inch deep to a 2" pipe.
Removable type stainless steel strainer plate shall be
supplied. Base shall be manufactured of tan and white
marble chips cast in white Portland cement to produce a
compressive strength of not less than 3,000 PSI, seven
days after casting. Terrazzo surface shall be ground,
polished, and the entire unit sealed to resist stains and
moisture after any air holes and/or pits are grouted.
Bases reinforced with 16-gauge wire.
Options
Offset drain.
Additional flanges.
(Drawings required)
Dimensions may vary ± ¼ inch. Please check unit
before installation.
Place base on a minimum ¼" bed of mortaror
plaster for warranty compliance.
|
|
Model 23-2HR
Barrier free, wheelchair accessible Terrazzo Shower
Base. Reduced threshold height for wheelchair
accessibility.
Click for Large View
|
Model PDF