SEARCH

What's New
All Products
Shower Bases
Shower Stalls
Tub Showers
Remodel Units
ADA Compliant
Accessible
Bathtubs
Utility Sinks
Mop Sinks
Shower Walls
Resources
Accessories
Literature

MOP SINKS


Florestone
Model 95/96
NEO Angle Drop Front

Terrazzo Mop Bases

Architect’s
Specifications



Furnish and install neo angle drop front mop base as manufactured by Florestone. Shoulder shall be not less than 4" high inside and not less than 1¾" wide. Galvanized, bonderized steel flange will be cast integral and extend at least one inch above shoulder on two sides for corner installation against stud wall. Stainless steel protective cap to be cast integral on drop front (Model 96 only). Drain body shall be brass, cast integral and shall provide for a non-caulked connection (lead caulked optional) not less than one inch deep to a two or three inch pipe (specify 2" or 3"). Mop sinks with 3" drains are supplied with a Wedge-Lok® seal for use on ABS pipe only. Base shall be manufactured of tan and white marble chips cast in white portland cement to produce a compressive strength of not less than 3000 PSI, seven days after casting. Terrazzo surface shall be ground and polished with all air holes and/or pits to be grouted and excess removed and sealed to resist stains and moisture. Base will be reinforced with 16 gauge wire.


Note:


Specify 2" or 3" drain size (3" standard).
Specify Model Number and size.


Dimensions may vary ± ¼ inch. Please check unit before installation.


Shown: Model 95




Click for Large View

Note: Terrazzo is not designed to be used with anything
that is over 130 degrees Fahrenheit.


MODEL

A

B

C

D

E

WT.


95

24"

24"

12"

12"

12"

310

95

32”

32”

16"

16"

16"

385

95

36”

36"

18"

18"

18"

465


96

24”

24"

12"

12"

12"

310

96

32”

32"

16"

16"

16"

385

96

36”

36"

18"

18"

18"

465


Dimensions subject to
change without notice
Contact Florestone Products to
verify product specifications.



Model PDF
Model CAD


Installation PDF
Pricing PDF
Section PDF
Section CADs



CAD Drawings are compressed in zip format (.zip)


Get Media Viewers
Acrobat Reader
CAD Viewer
IZArc Zip Utility


    About Us | Contact Us | How to Order | Warranty | Codes | CADs | Colors

Copyright© 2021 Florestone Inc.