|
|
MOP SINKS
|
Florestone
Model 5
Terrazzo Mop Receptor
Architect’s
Specifications
Furnish and install mop receptor as manufactured by Florestone Products Co. Shoulder shall be not less than 8" high inside and not less than 1l" wide.
Drain body shall be brass, cast integral and shall provide for a non-caulked connection (lead caulked optional) not less than one inch deep to a two or three inch pipe (specify 2" or 3"). Mop sinks with 3" drains are supplied with a Wedge-Lok® seal for use on ABS pipe only. Receptor shall be manufactured of tan and white marble chips cast in white portland cement to produce a compressive strength of not less than 3000 PSI, seven days after casting. Terrazzo surface shall be ground and polished with all air holes and/or pits to be grouted and excess removed and sealed to resist stains and moisture. Receptor will be reinforced with 16 gauge wire. Stainless steel grid standard.
Note:
|
Specify 2" or 3" drain size (3" standard).
|
Dimensions may vary ± ¼ inch. Please check unit before installation.
|
|
|
|
|
A
|
B
|
HT.
|
C
|
D
|
E
|
WT
|
|
|
|
24"
|
24"
|
10"
|
12"
|
12"
|
12"
|
221
|
|
Dimensions subject to
change without notice
|
Contact Florestone Products to
verify product specifications.
|
|
Standards:
|
|
I.A.P.M.O.
|
International Association of Plumbing and Mechanical Officials File No. 2646.
|
|
ANSI
|
American National Standards Institute - Specifications Z-124.6.
|
HUD/FHA
|
National Specifications UN-73.
|
CSA TEST
|
Warnock Hersey Listed: CAN / CSA - B45.0 - CAN / CSA - B45.5
|
|
|
CAD Drawings are compressed in zip format (.zip)
|
