|
|
NON-ADA/SPECIAL NEEDS
|
Florestone
Model 3PC 60-33HTS
Institutional Tub/Shower
59¾" x 32" x 80½"
Weight:175 lbs.
Architect’s
Specifications
Furnish and install three-piece gel-coated shower Model 3PC-60-33HTS designed for institutional use as manufactured by Florestone Products Company. Unit to have a flame spread of 25 and a smoke density rating of 400 or less in accordance with ASTM-E84 test method. Basic shower will conform to ANSI-Z-124.1. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Alsons® hand-held shower head with hose and chrome-plated slide bar; stainless steel grab bars; 2 each 36", 1 each 18", 1 each 16"; molded corner soap dish.
608.3.1.2 Vertical Grab Bar. A vertical grab bar 18 inches (455 mm) minimum in length shall be provided on the control end wall 3 inches (75 mm) minimum to 6 inches (150 mm) maximum above the horizontal grab bar, and 4 inches (100 mm) maximum inward from the front edge of the shower.
Shower comes complete with accessories:
|
•
|
Stainless steel curtain rod
|
•
|
Symmons® pressure balance mixing valve
|
•
|
Alsons® hand-held shower head, hose and chrome-plated slide bar
|
•
|
Stainless steel grab bars:
2 each 36", 1 each 18", 1 each 16"
|
•
|
Molded corner soap dish
|
Dimensions may vary ± ¼ inch. Please check unit before installation.
|
Standards:
|
I.A.P.M.O. Listed File 0687
|
|
ANSI-Z-124.2
|
ASTM-E84
|
|
|
|
|
Dimensions subject to
change without notice
|
Contact Florestone Products to
verify product specifications.
|
|
|
|
|
CAD Drawings are compressed in zip format (.zip)
|
